1. The correct method of using thermal oil

There must be a correct process for using heat transfer oil. If the wrong work is done or some work is reversed during use, it may directly affect the efficiency of heat transfer oil use, and even affect the safety of heat transfer oil use. So before using it, it is important to understand the taboos of using heat transfer oil, as well as the specific usage methods and the tasks that we absolutely cannot do.

2. Mixing different brands of thermal oil is prohibited.

The formula of heat transfer oil sold by each heat transfer oil manufacturer may still vary slightly. If different brands of heat transfer oil are mixed, it will affect the effectiveness and service life of the heat transfer oil.

3. Before use, it is necessary to clean the thermal oil furnace.

If it is a new thermal oil equipment, thermal oil can be used directly, but in many cases, the thermal oil needs to be replaced. Therefore, the old oil must be cleaned before this, otherwise it will aggravate the aging and deterioration of the new oil.

4. To prevent the occurrence of leakage.

If there is a leakage phenomenon in the work, it is easy to cause rapid oxidation of the heat transfer oil, and even lead to excessive consumption of the heat transfer oil. This is definitely something we need to pay attention to. So before using thermal oil, it is necessary to check whether there is any leakage in the thermal oil furnace and repair it in a timely manner.

Pay attention to the above points to ensure the safe use of thermal oil. In recent years, thermal oil accidents have also occurred from time to time. The safe use of thermal oil must be taken into account, and the condition of thermal oil equipment should be regularly checked. Various indicators of thermal oil should be regularly tested to identify and solve problems.

On site operators should have self-protection awareness and basic knowledge and ability to handle emergency situations when using thermal oil for safety and hygiene.

1. Long term inhalation of heat transfer oil gas should be avoided. When working in poorly ventilated environments such as containers, it is necessary to have ventilation equipment;

2. Wear labor protection equipment according to regulations, such as oil resistant protective gloves, heat radiation protection for eyes, etc;

3. If the skin comes into direct contact with thermal oil, it should be washed with soap and then rinsed clean with water. If a large amount of thermal oil is splashed on clothing, it should be quickly removed and thoroughly cleaned of the splashed thermal oil on the skin;

4. When injecting or extracting heat transfer oil, the work site should be well ventilated and open flames are strictly prohibited. Operators should be careful to prevent high-temperature heat transfer oil from splashing onto their bodies and causing burns;

5. If encountering some emergency situations, be calm and composed, and take appropriate measures to deal with them. If burned by high-temperature heat transfer oil, immediately rinse with a large amount of cold water or chill the burned area, perform physical local cooling, and promptly send to the hospital for treatment; When a large amount of thermal oil mist is accidentally inhaled, the patient should be quickly transferred to an environment with good air circulation. If the patient experiences physical discomfort, mental confusion, etc., emergency treatment with oxygen should be taken, and the patient should be immediately sent to the hospital for treatment; If thermal oil splashes into the eyes, rinse the eyes quickly with flowing water until the irritation disappears or there is no major problem, and seek medical treatment; If you accidentally drink or consume thermal oil, you should immediately dilute it with plenty of water or take measures to induce vomiting to expel the thermal oil and seek medical treatment at the same time.

Diphenyl ether manufacturer